marinehose@chinarubberhose.com
Monday to Friday:8am to 6pm
English
Home
Products
Marine Hose
Floating Hose
Single Carcass Floating Hose
Double Carcass Floating Hose
PU Coating Floating Hose
Submarine Hose
Single Carcass SubmarineHose
Double Carcass Submarine Hose
Dock Hose
Ship To Ship Hose
50m Dock Oil/Gas/LPG Hose
11.8m Dock Oil/Gas/LPG Hose
Industrial Rubber Hose
Air Hose
Water Hose
Chemical Hose
Food Hose
Fuel Hose
Hydraulic Oil Hose
Wear-resistant Hose
Steam/Hot Water Hose
Radiator Hose
Phosphoric Acid Hose
Isolation Hose
Carbon Free Non-conductive Hose
Dredge Hose
Floating Dredge Hose
Dredging Hose
Slurry Suction Hose
News
Video
About Us
Factory Tour
Contact Us
Home
Products
Marine Hose
Marine Hose
Hello, come to consult our products !
Tank Rail Hose(Single carcass)
Tank rail hose are used to connect the hose string to the tanker manifold.This hose has minimal floatation in the centre where it bends over the tanker rail, with extra flotation at each end providing hose buoyancy.The tanker connection end has a larger buoyancy unit than the outboard end to help support valve and coupling equipment.
inquiry
detail
Tank Rail Hose(Double carcass)
Tank rail hose are used to connect the hose string to the tanker manifold.This hose has minimal floatation in the centre where it bends over the tanker rail, with extra flotation at each end providing hose buoyancy.The tanker connection end has a larger buoyancy unit than the outboard end to help support valve and coupling equipment.
inquiry
detail
Tank Rail Hose(Single carcass)
Tank rail hose are used to connect the hose string to the tanker manifold.This hose has minimal floatation in the centre where it bends over the tanker rail, with extra flotation at each end providing hose buoyancy.The tanker connection end has a larger buoyancy unit than the outboard end to help support valve and coupling equipment.
inquiry
detail
Tank Rail Hose(Double carcass)
Tank rail hose are used to connect the hose string to the tanker manifold.This hose has minimal floatation in the centre where it bends over the tanker rail, with extra flotation at each end providing hose buoyancy.The tanker connection end has a larger buoyancy unit than the outboard end to help support valve and coupling equipment.
inquiry
detail
Tail Hose(Double carcass)
The last few hoses before the tanker connection hose,the tail hose is specially designed to be flexibility to improve handling at the tanker end of the floating hose string.It always used to connect the mainline hose and the MBC to the tank rail hose.
inquiry
detail
Tail Hose(Single carcass)
The last few hoses before the tanker connection hose,the tail hose is specially designed to be flexibility to improve handling at the tanker end of the floating hose string.It always used to connect the mainline hose and the MBC to the tank rail hose.
inquiry
detail
Reducer Hose(Double carcass)
The reducer hose is between the mainline hose with big bore and tail hose with small bore,the taper is made within the fitting at the larger end. The hose outside diameter remains same over the whole length.Typical reductions being 24/20", 20/16", 16/12"
inquiry
detail
Reducer Hose(Single carcass)
The reducer hose is between the mainline hose with big bore and tail hose with small bore,the taper is made within the fitting at the larger end. The hose outside diameter remains same over the whole length.Typical reductions being 24/20", 20/16", 16/12"
inquiry
detail
Reducer Hose(Double carcass)
The reducer hose is between the mainline hose with big bore and tail hose with small bore,the taper is made within the fitting at the larger end. The hose outside diameter remains same over the whole length.Typical reductions being 24/20", 20/16", 16/12"
inquiry
detail
Reducer Hose(Single carcass)
The reducer hose is between the mainline hose with big bore and tail hose with small bore,the taper is made within the fitting at the larger end. The hose outside diameter remains same over the whole length.Typical reductions being 24/20", 20/16", 16/12"
inquiry
detail
Mainline Hose(Single carcass)
Mainline hose forms the majority compenent of the hose string,the hose outside diameter remains same over the whole length.
inquiry
detail
Mainline Hose(Double carcass)
Mainline hose forms the majority compenent of the hose string,the hose outside diameter remains same over the whole length.
inquiry
detail
Mainline Hose(Single carcass)
Mainline hose forms the majority compenent of the hose string,the hose outside diameter remains same over the whole length.
inquiry
detail
Mainline Hose(Double carcass)
Mainline hose forms the majority compenent of the hose string,the hose outside diameter remains same over the whole length.
inquiry
detail
One End Reinforced Half Floating Hose(Single carcass)
Usually applications are used to connect the terminal of the single point mooring or other oil transfer installations.It acheives the transition from rigid to flexible and move the bending moment from towards the mid-section of the hose.
inquiry
detail
One End Reinforced Half Floating Hose (Double carcass)
Usually applications are used to connect the terminal of the single point mooring or other oil transfer installations.It acheives the transition from rigid to flexible and move the bending moment from towards the mid-section of the hose.
inquiry
detail
One End Reinforced Half Floating Hose(Single carcass)
Usually applications are used to connect the terminal of the single point mooring or other oil transfer installations.It acheives the transition from rigid to flexible and move the bending moment from towards the mid-section of the hose.
inquiry
detail
One End Reinforced Half Floating Hose (Double carcass)
Usually applications are used to connect the terminal of the single point mooring or other oil transfer installations.It acheives the transition from rigid to flexible and move the bending moment from towards the mid-section of the hose.
inquiry
detail
One End Reinforced Hose With Collars(Single carcass)
For use at locations where the hose strings connect to rigid pipework on SPM or seabed PLEM.
inquiry
detail
One End Reinforced Hose With Collars(Double carcass)
For use at locations where the hose strings connect to rigid pipework on SPM or seabed PLEM.
inquiry
detail
One End Reinforced Hose Without Collars(Single carcass)
For use at locations where the hose strings connect to rigid pipework on SPM or seabed PLEM.
inquiry
detail
One End Reinforced Hose Without Collars(Double carcass)
For use at locations where the hose strings connect to rigid pipework on SPM or seabed PLEM.
inquiry
detail
Mainline Hose with collars(Double carcass)
The hose outside diameter remains same over the whole length, it is the principal compent of the submarine hose string.
inquiry
detail
Mainline Hose with collars(Single carcass)
The hose outside diameter remains same over the whole length, it is the principal compent of the submarine hose string.
inquiry
detail
Mainline Hose without collars(Double carcass)
The hose outside diameter remains same over the whole length, it is the principal compent of the submarine hose string.
inquiry
detail
Mainline Hose without collars(Single carcass)
The hose outside diameter remains same over the whole length, it is the principal compent of the submarine hose string.
inquiry
detail
50m Dock Oil/Gas/LPG Hose
Application Dock oil hose is designed for maximum service life in petroleum product and refined fuel transfer at up to 300 PSI service pressure. This dock hose design is beneficial where a higher working pressure or a heavier wall for abrasion is desired. Dock hoses are heavy duty suction and discharge hoses designed to transfer between bargers, storage tanks and marine vessels. These hoses incorporate a specially formulated tube to resist media to 50-100% aromatic content., while the cover i...
inquiry
detail
11.8m Dock Oil/Gas/LPG Hose
Dock /Cargo oil hose Dock Oil Transfer Hose Construction: Tube: Black,smooth,Nitrile synthetic rubber,suitable for up to 50% aromatic content. Reinforcement: Multiply heavy duty synthetic tire cord supported with helix wire, anti-static wires. Cover: Black, wrapped finish, synthetic rubber for high abrasion , ozone & weather resistance. Ideal Temperature: -40℃ to +100℃( 180℉) Safety factor:5:1 Dock Oil Transfer Hose Characteristic: C/W built-in flanges with one side fixed and one side swi...
inquiry
detail
Liquid Petroleum Gas Rubber Hose (LPG hose)
Liquid Petroleum Gas Rubber Hose (LPG hose) The suction and discharge hose is specially designed for LPG/LNG offshore transfer, LPG hoses have been widely used for LPG transfer in dock-side applications. LPG hose construction for a given application depends upon the product being transferred and the operational parameters. In particular, refrigerated LPG has a different set of hose system transfer requirements to that of LPG at ambient temperatures. Construction: Tube: NBR Reinforcement la...
inquiry
detail
Hit enter to search or ESC to close
English
French
German
Portuguese
Spanish
Russian
Japanese
Korean
Arabic
Irish
Greek
Turkish
Italian
Danish
Romanian
Indonesian
Czech
Afrikaans
Swedish
Polish
Basque
Catalan
Esperanto
Hindi
Lao
Albanian
Amharic
Armenian
Azerbaijani
Belarusian
Bengali
Bosnian
Bulgarian
Cebuano
Chichewa
Corsican
Croatian
Dutch
Estonian
Filipino
Finnish
Frisian
Galician
Georgian
Gujarati
Haitian
Hausa
Hawaiian
Hebrew
Hmong
Hungarian
Icelandic
Igbo
Javanese
Kannada
Kazakh
Khmer
Kurdish
Kyrgyz
Latin
Latvian
Lithuanian
Luxembou..
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Mongolian
Burmese
Nepali
Norwegian
Pashto
Persian
Punjabi
Serbian
Sesotho
Sinhala
Slovak
Slovenian
Somali
Samoan
Scots Gaelic
Shona
Sindhi
Sundanese
Swahili
Tajik
Tamil
Telugu
Thai
Ukrainian
Urdu
Uzbek
Vietnamese
Welsh
Xhosa
Yiddish
Yoruba
Zulu
Kinyarwanda
Tatar
Oriya
Turkmen
Uyghur