page_banner

One End Reinforced Submarine Hose With Collars

Hello, come to consult our products !

One End Reinforced Submarine Hose With Collars

One End Reinforced Submarine Hose, is used for connecting sea bed manifold Or buoy connection, From SPM To Vessel, The submarine hoses we produce is combine strength with flexibility, with a design that has taken into consideration many factors such as water depth, tide, buoy excursions and wave patterns, all are in accordance with OCIMF standards.


Product Detail

FAQ

Product Tags

Construction & Material
Main Carcass
Main Lining / Inner Tube : Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
Single Carcass And Double Carcass
Outer Cover:Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.
Fittings:End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.
Tests:All tests according to GEPHOM 2009 and Customer detail.

mainline marine oil hoseStandards and Specifications
Zebung single carcass hoses are designed and produced in full accordance to OCIMF standards. These products are also subjected to manufacturing and testing requirements dictated by ISO 9000:2001 quality standards.

Rated working pressure
The oil hoses have a RWP of at least 15 bar. 19 bar and 21 bar hoses are also available if specified by the customer. They are suitable for operation at an internal pressure from minus 0.85 bar to the RWP.

Flow Velocity
The linings of Zebung submarine hoses are constructed from elastomers and fabrics suitable for continuous operation at a flow velocity of 21m/s.

Application
The submarine hoses are suitable for use with crude oil and liquid petroleum products from -20℃ to 82℃, and an aromatic hydrocarbon content no greater than 50% by volume.
Electrical Continuity
A low resistance connection will be provide with a copper wire and helix steel wire.

Characteristic
1. connecting FPSO
2. rated working pressure: 21 bar
3. electrical continuity: electrical continuous or discontinuous
4. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.
Specifications can be designed by customer requirements.

One End Reinforced Submarine Hose With Collars

I.D. / mm Weight in air / KG O.D. / mm M.B.R. / m
9.1m 10.7m 12.2m A B
150(6”) 382/144 419/161 456/178 368 254 0.6(2.0’)
200(8”) 485/218 541/243 596/268 471 311 0.8(2.8’)
250(10”) 575/286 756/315 837/344 471 368 1.0(3.3’)
300(12”) 893/327 1003/372 1013/417 581 471 1.2(4.0’)
400(16”) 1808/659 2028/726 2248/793 697 581 1.6(5.3’)
500(20”) 2412/928 2694/1019 2976/1110 799 697 2.0(6.6’)
600(24”) 3369/1367 3775/1572 4181/1659 946 799 2.4(8.0’)

12 Inch underwater tubing certificate

Underwater tubing certificate


  • Previous:
  • Next:

  • Write your message here and send it to us