Reducing Floating Hose
Construction & Material
Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);
Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;
Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
Cover: Black Syntetic Rubber Smooth oil and fuel resistant.
Floating Material : Closed cell Foam.
Outer Cover:Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.
Helical Orange strip.
Fittings:End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.
Tests:All tests according to GMPHOM 2009 and Customer detail.
The floating marine oil hose is designed for transportation of crude oil and liquid petroleum products between loading and unloading vessels at offshore mooring systems.
1. connecting aft manifold and tail hose
2. lifting lugs should be able to sustain loads, minimum breaking load is 12”=100KN 16”=150KN 20”=200KN
3. rated working pressure: 21 bar
4. minimum reserve buoyance: 20% or according to customer requirements
5. electrical continuity: electrical continuous or discontinuous
6. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.
Specifications can be designed by customer requirements.
|I.D. / mm||Weight in air / KG||O.D. / mm||M.B.R. / m|
Floating tubing BV certificate
Underwater tubing BV certificate
Own film production base
The quality of film directly determines the quality of hose. Therefore, zebung has invested a lot of money to build a film production base. All hose products of zebung adopt self-produced film.
Multiple production lines to ensure production progress
Our factory has many modern production lines and a large number of experienced technical engineers. It not only has high quality production quality, but also can ensure the customer's requirements for the supply time of products.
Each pipeline product is subject to strict inspection before leaving the factory
We have established a high-tech product and raw material testing laboratory. We have been committed to the digitization of product quality. Each product needs to go through a strict inspection process before it can leave the factory after all product data meet the requirements.
Covering the global logistics network and strict finished product packaging and delivery process
Relying on the distance advantages of Tianjin port and Qingdao port, Beijing Capital International Airport and Daxing International Airport, we have established a fast logistics network covering the world, basically covering 98% of countries and regions around the world. After the products are qualified in the off-line inspection, they will be delivered at the first time. At the same time, when our products are delivered, we have a strict packing process to ensure that the products will not cause losses due to logistics during transportation.
Leave your details and we'll contact you at the first time.